Here is a Renishaw inVia Raman Confocal Microscope System with Leica DM 2500M Upright 5x 20x 50x. This Renishaw inVia Raman Confocal Microscope system is in perfect working order and excellent cosmetic condition. Microscope and Optics have been professionally cleaned. System consists of: Renishaw inVia Raman Confocal System Leica DM 2500M Ren (RL/TL) Microscope Eyepieces: 10x/22 Leica eyepieces Light Sources: 100W Halogen 300 mW NIR 785nm Laser HPNIR785 Objectives: 5x/0.12 N Plan 20x/0.40 N Plan EPI 50x/0.75 N Plan Stage: MS 20 Encoded Stage 100nm Motorized XYZ stage Software Controlled MSC20 Encoded Stage Controller Camera: Philips SPC900NC/00 CCD camera 1248 x 960 Image Resolution RenCam CCD detector 400 x 578 px Image capture software WiRE 3.2 with live view Interlocks: Microscope enclosure Laser Shutter Optional External interlock connector Laser Path: 2 axis Pre Beam Expanders 2 axis Post Beam Expanders Pinhole Slit Master and Slave ND Set Flags 1-4 Podule Silcon tilt Podule AStop Podule FStop Podule Upper Selector Wheel Podule Lower Selector Wheel Entrance Filter 1 and 2 Beam Expander Grating Mot or Laser Shutter Pre slit lensfocus Post slit lensfocus CCD lensfocus Linefocus Motor All associated communication and power cables. Configuration and Setup: This Renishaw inVia Raman Confocal System is currently setup with a 300 mW 785nm laser for reflected light illumination studies. The WiRE software allows for live viewing of the sample in brightfield camera/eyepiece, brightfield/laser CCD sensor/camera, or laser CCD sensor modes. With the WiRE software installed this system is capable of automatic sample scans to render 3D representations as well as measurements of the surface. Orientation - Upright. Illumination Type - Brightfield reflective and Confocal. This Renishaw inVia Raman system can be upgraded to include up to 3 additional lasers for a total of 4. Initial setup and calibration should be performed by a Renishaw Technician. Can be collected local or shipping.
QR Code Link to This Post